SafeTMed Presents the Dent-X Respirator FN-N95-510 Small

Click the image above to watch the video
Description and Classification
Masques de protection respiratoire à particules
Nous ne proposons que des respirateurs de qualité supérieure, fabriqués au Canada, pour une utilisation dans des environnements à haut risque.
Performance Requirements
Test | Health Canada Requirements | NIOSH Requirements | FN-N95-510 Small |
---|
Particulate Filter Efficiency | >_95% | >_95% | Pass |
Inhalation Airflow Resistance | < 35 mmH2O (343.2 Pa) | < 35 mmH2O (343.2 Pa) | Pass |
Exhalation Airflow Resistance | < 25 mmH2O (245.2 Pa) | < 25 mmH2O (245.2 Pa) | Pass |
Mechanical Strength of Head Strap | 10N (0.98kg) Per strap | 2.2kg Per Strap | Pass |
Packaging Specification
Respirator Weight | 0.11 oz |
---|
Respirators in Box | 10 |
Weight of Box with Respirators | 0.14 lbs |
Box Dimensions | L: 1.5” x W: 3.81” x H: 9” |
Respirators Per Case | 300 |
Boxes Per Case | 30 |
Weight of Case | 6.1 lbs |
Case Dimensions | L: 20” x W: 15.5” x H: 8.75” |
Respirators Per Pallet | 12600 |
Cases Per Pallet | 42 |
Pallet Dimensions | L: 41” x W: 48” x H: 66” |
Instructions For Use
- Hold the respirator in hand with nose clip at your fingertips.
- Place the respirator under your chin and its nose clip upwards. Pull the ear loop on one end around one ear, repeating this step for the opposite ear loop.
- Push the nosepiece inwards with your fingertips to conform to the shape of your nose.
- Face fit check must be done each time the respirator is worn: I. Cover the respirator with both hands, breathing sharply. If leakage along the nose bridge is detected, repeat step 3 and adjust the shape of the clip to the nose bridge. II. If leakage is detected along the rest of the respirator edge, adjust the straps again. III. If leakage cannot be eliminated, do not wear the respirator and stop going into the contaminated environment. Refer to your supervisor for assistance.